The short version
Key points
- The cleaner weighs around 15 kg when dry, making it difficult to lift from the pool.
- It cleans the water surface, floor, walls and waterline rather than focusing on one area.
- The robot uses ultrasonic mapping and 40 sensors to plan its route and adapt during a cleaning cycle.
- Battery life is stated as around 10 to 12 hours for surface cleaning or roughly five hours for floor and wall cleaning.
- The listed sale price in the video is $2,699, compared with a normal price of $3,499.
A substantial cordless pool cleaner
The Aiper Scuba X1 Pro Max is built on a much larger scale than a lightweight pool gadget. It weighs around 15 kg when dry, and that weight is noticeable when removing it from the water. The size may be justified by its cleaning hardware, but it also makes the unit difficult to handle and potentially excessive for smaller or medium-sized pools.
The robot uses a wireless charging dock, so there are no charging contacts on the cleaner itself to corrode. Once a cleaning cycle finishes, or the battery becomes low, it automatically rises to the surface for collection.
Strong suction and broad cleaning coverage
The cleaner uses a dual-jet, nine-motor brushless system. Aiper claims suction of 8,500 gallons per hour, equivalent to approximately 32,000 litres per hour. During testing, it collected fine sand, leaf fragments, larger leaves and small pebbles without apparent clogging or slowing down.
The Scuba X1 Pro Max is designed as an all-in-one cleaner. It vacuums floating debris from the water surface, scrubs the pool floor, climbs the walls and cleans the waterline, including the area where algae and grime can build up. After a full cycle, the pool appeared fresh and clean.
Battery life, filtration and maintenance
The X1 Pro Max has a 10,400 mAh battery. Aiper’s claimed figures are around 10 to 12 hours of surface cleaning and roughly five hours when continuously cleaning the floor and sides. Testing found the surface-cleaning result in Eco mode was close to the claim, while Max mode used the battery more quickly.
Charging takes approximately four to six hours, which means the cleaner is not ideal for back-to-back cleaning sessions. The filter is a micro-mesh ultra-fine design rated to capture particles down to three microns, including algae, dust, pollen and fine sand. An additional filter is included. Regular maintenance mainly involves emptying the filters and removing debris such as dog hair from the brushes.
Important limitations and price
The navigation can become confused if the pool is heavily dirty or resembles a swamp on the first run. The cleaner performs better with a relatively clear starting point. Its weight is the most significant physical drawback, while the lack of manual steering may matter to users who want direct control.
In the video, the Aiper Scuba X1 Pro Max is described as being on sale for $2,699 in Australia, compared with a normal price of $3,499. That makes the expected performance high and limits its appeal for owners of smaller pools.
TechManPat’s conclusion
I found that the Aiper Scuba X1 Pro Max delivers very strong suction, broad cleaning coverage and convincing navigation. I also see its weight, price, four-to-six-hour charging time and lack of manual steering as real trade-offs. For a larger pool, I consider it a powerful hands-free option, but I would not choose it for a small pool or treat it as a universally suitable upgrade.
This knowledge-centre summary is based on the linked TechManPat video and reflects the information available when it was published. Check current pricing, availability and policies before acting.
