Hisense PX3 Review – Is This the Ultimate 4K Laser Projector? | TechManPat

A large-screen alternative to a television

The main appeal of the Hisense PX3 is its ability to create a much larger image than a conventional television without requiring a long room or ceiling installation. The review describes screen sizes from 80 inches to 150 inches, with the projector positioned close to the wall. This creates a cinema-style experience while allowing the projector itself to remain relatively unobtrusive when it is not being used.

Projectors still have important trade-offs. They generally perform best in dim or dark rooms, while televisions are easier to use in bright spaces. The PX3 also requires more setup than a TV, including physical alignment and potentially the installation of a suitable screen.

Design, throw distance and screen options

The PX3 has a modern design and includes a remote with a built-in solar panel for recharging. Because it is an ultra-short-throw projector, it sits close to the floor and wall, roughly at couch or eye level for the projected image. Adjustable feet are used to align the picture, although achieving the correct setup takes some care.

The review recorded approximately 11.9 centimetres from the wall for an 80-inch image, 21.6 centimetres for 100 inches, 31.4 centimetres for 120 inches and 46 centimetres for 150 inches. At the largest size, pixel density is more visibly stretched, although the reviewer found the 4K resolution and image processing helped maintain an impressive result from a suitable viewing distance.

A wall can be used, but a dedicated ultra-short-throw ambient-light-rejecting screen should provide better contrast, sharpness and colour performance, particularly in rooms with some light. The review also discussed specialist screen paint as a possible wall-based alternative.

Picture quality and brightness

The PX3 uses Hisense’s Laser Precision Ultra technology with a triple-laser light source and a Texas Instruments DLP chip. Hisense says this combination is intended to improve colour accuracy, brightness, colour gamut and light distribution.

During testing, 4K footage appeared sharp and detailed, with bright scenes and colourful content standing out. The projector is rated at 2,800 ANSI lumens in the review, which made it usable in moderately lit conditions, although darker rooms remain preferable.

Black levels are a limitation compared with televisions that can switch individual pixels off. Projectors rely on reflected light, so dark areas are affected by ambient light and the surface being used. The review also cites a 3,000:1 contrast ratio and found that the limitations were noticeable but not a deal-breaker. HDR Dynamic was the preferred picture mode, while Enhanced ACR appeared almost identical during testing.

Gaming and smart features

The PX3 includes a dedicated game mode with automatic low-latency functionality. It was tested with a Nintendo Switch and PlayStation 5, and the review describes the large-screen gaming experience as immersive. The projector is also Xbox certified, although serious competitive gamers may still prefer a high-refresh-rate television with extremely low latency.

The smart interface was described as fast and responsive, with a wide selection of pre-installed and downloadable applications. Casting, AirPlay, music sharing and three HDMI ports are also included. The main software criticism was the amount of recommended content presented throughout the interface.

Laser lifespan and overall positioning

The TriChroma laser light source is rated in the review at more than 25,000 hours of full brightness, with no noticeable image degradation expected over that period. This avoids the lamp replacement associated with traditional projectors.

The PX3 is aimed at viewers who prioritise a cinematic, very large image and have suitable space and lighting control. It can be a compelling alternative to an extremely large television, but the projector and a quality ALR screen can represent a substantial investment.